No Wear Guard (228 x 50 mm)

Have you ever looked at your boat and wondered "HOW CAN I STOP THE ROPES RUBBING ON THE GELCOAT, FIBERGLASS AND WOOD" and prevent wear and tear on my boat?

Well now all your problems are over. Introducing "The No-Wear Chafe Guard"

Prevent chafe and damage to your boat
Easy to install
Highest grade marine Stainless Steel
Industrial strength double sided adhesive
 

Installation
The No-WearGuard  is easy to apply. Simply clean and dry the area of the boat to be used (lightly filling and sanding any dents if neccessary for best results).  Remove the backing paper from the adhesive tape, position the No-Wear Guard and press it down, rubbing with a soft cloth to ensure all edges are firmly stuck down.  If being used on a sharp bend, it is advisable to pre-bend before removing the backing paper(this can be done by hand, or around the area to be used) this will help with the adhesion. If for any reason you wish to remove the No-Wear Guard, use either a heat gun or hairdryer, gently heat until it can be pulled of

(1007)

SKU 1007
Brand Absolute Marine

Be The First To Review This Product!

Help other DKM Fishing & Marine Limited users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category